Catalogo 2011

Préparation du document



Quality Since 1959
Effective Sept. 20, 2010 Catalog #52
2011 NEW 2011 NEW
Poly Cam Lever Couplings
fEAtURES
• Precision molded in polypropylene, reinforced with fiberglass
for strength and durability.
• Stainless steel rings, cam levers and pins resist corrosion
• Iinterchangeable with all types of cam lever couplers.
NEW!
PART NO
220FSWP90
CAM LEVER COUPLINGS
DESCRIPTION
MAX
PSI
GASKET QTY PRICE
2" Male Adapter w/90° Sweep -
2" Male Thread 125 EPDM 1 $40.67
NOTE: Includes: M220MPTSWP90, FC221HD, M221G & M220A. See page 4 & 65.
2" 90° POLY CAM LEVER COUPLINGS
PART NO
DESCRIPTION
MAX
PSI
GASKET QTY PRICE
200B90 2" 90° Female Coupler-2" Female Thread 125 EPDM 1 $22.09
CAM LEVER COUPLINGS
PART NO
DESCRIPTION
MAX
PSI
GASKET QTY PRICE
201B 2" Female Coupler-2" Extended Male Thread 125 EPDM 1 $18.10
CAM LEVER COUPLINGS
PART NO
DESCRIPTION
MAX
PSI
GASKET QTY PRICE
303B 3" Female Coupler-3" Extended Male Thread 75 EPDM 1 $39.04
2
®
PRODUCTS
Swivel
FEAturES
• Unrestricted flow!
• PTFE thrust bearing.
• EPDM O-Rings.
• Stainless steel drive stud.
• 75 P.S.I.
Full
Por t!
SWIVEL
PART NO DESCRIPTION
MAX
PSI
QTY PRICE
SW220 2" Full Port Male Thread x 2" Female Thread Swivel 75 1 $33.70
MANIFOLD SWIVEL
PART NO DESCRIPTION
MAX
PSI
QTY PRICE
MSW220 2" Full Port Manifold Flange Swivel 75 1 $33.70
Mini Check Valves
FEAturES
• One piece construction.
• 150 P.S.I. maximum.
• 1-2 P.S.I. spring.
• Glass reinforced polypropylene.
• 316 stainless steel spring.
• EPDM gasket.
PART NO
MINI CHECK VALVES
DESCRIPTION
MAX
PSI
PIPE
SIZE
QTY PRICE
CV100MT 1" Male x Female NPT 150 1" 1 $18.63
3" MANIFOLD StuBBY VALVES
PART NO
DESCRIPTION
MAX PIPE
PSI SIZE THRU OPENING
BALL QTY PRICE
MVS300CF 3" Flange x 3" Flange 100 3" 2½" 1/box $141.26
MVS300CFFP 3" FP Flange x 3" FP Flange 100 3" 3" 1/box $172.80
3
Improved
Flow for
Max GPM!
2011 NEW 2011 NEW
Sweeps
FEaturES
• Direct replacement for standard 90° flanged couplings.
M220ASWP90
M220BRBSWP90
M220MPTSWP90
M220SWP90
M300ASWP90
M300MPTSWP90
M300SWP90
M300ASWPG90
M300MPTSWPG90
M300SWPG90
SWEEPS
PART NO DESCRIPTION QTY PRICE
M220ASWP90 2" Full Port Flange x Male Adapter Sweep 1 $13.35
M220BRBSWP90 2" Full Port Flange x Hose Shank Sweep 1 $31.50
M220MPTSWP90 2" Full Port Flange x Male NPT Thread Sweep 1 $13.35
M220SWP90 2" Full Port Flange x Flange Sweep 1 $13.35
M300ASWP90 3" Flange x Male Adapter Sweep 1 $61.25
M300MPTSWP90 3" Flange x Male NPT Thread Sweep 1 $61.25
M300SWP90 3" Flange x Flange Sweep 1 $61.25
SWEEPS w/Gauge Port
PART NO DESCRIPTION QTY PRICE
3" Flange x Male Adapter Sweep w/
M300ASWPG90
½" gauge port
1 $61.25
3" Flange x Male NPT Thread Sweep w/
M300MPTSWPG90
½" gauge port
1 $61.25
M300SWPG90 3" Flange x Flange Sweep w/ ½" gauge port 1 $61.25
4
®
PRODUCTS
• Displays overall total volume & batch total volume!
• Flow rate allows for Gallons or Liters Per Minute.
• The display reads 6 digits for Rate, 8 digits for Total
and 1 decimal place reading in tenths.
• Magnetic style meter with stainless steel electrodes.
• Self calibrating meter.
• Measures water and most conductive liquids.
• Easy to change six (6) AA batteries.
• No moving parts to fail during use.
• Glass-reinforced polypropylene.
• Temperature range from 0ºF to 150ºF.
• Accuracy is 99% from 2 to 110 GPM for 1".
2-110
GPM!
FM100
There are 3 photoeyes located on the face of the flowmeter.
Note: These are not push buttons, to activate you must hold
your finger over the photoeye for 2-4 seconds.
FLOW METERS
PART NO DESCRIPTION QTY PRICE
FM100 1" Full Port Female NPT Flow Meter 1 $1,033.63
MFM100 1" Full Port Manifold Flow Meter 1 $1,033.63
See page 62 for our 2" Full Port Manifold Flow Meter!
MFM100
NOTE: It is recommended to have at least 10 inches of
straight pipe before and after the flow meter.
5
2011 NEW 2011 NEW
M332 Manifold Wet Seal Series Pumps
FEATURES
• Durable cast iron construction.
• Dynamically balanced impeller.
• Replaceable inlet and outlet flanges.
• Graphite loaded silicon carbide seal with
stainless steel cup and spring with FKM (viton type) rubber.
• Pump end separated from engine.
• Large weep holes between pump end and engine.
• “V” Shaped for quicker priming.
NEW!
Run Dry
Capability!
CAUtION-wArNINg: Please do not run pumps dry,
restrict or reduce port sizes or dead head pumps. This
could cause component failure to pump.
DO NOt USE wItH FLAMMABLE LIQUIDS.
Seal reservoir
double seals!
3" MANIFOLD WET SEAL CI PUMPS W/GAS ENGINES
PART NO DESCRIPTION HP QTY PRICE
M332PIH13W
3" Manifold Cast Iron Wet Seal Pump w/13 HP
Honda ® Engine
13 1 $4,140.00
50
45
40
FLOW CHART
120
100
35
80
3" MANIFOLD WET SEAL CI PUMPS W/ELECTRIC MOTORS
PART NO DESCRIPTION HP QTY PRICE
M332PIE10W
3" Manifold Cast Iron Wet Seal Pump w/10HP
Three Phase Electric Motor
10 1 $4,140.00
M332PIE101W
3" Manifold Cast Iron Wet Seal Pump w/10HP
Single Phase Electric Motor
10 1 $5,537.25
PRESSURE (PSI)
30
25
20
15
10
60
40
20
HEAD (FT)
5
0
360 300 240 146 0
FlOW (GPM)
0
6
®
PRODUCTS
19
6
29
28 7
14
26
24
13 11 27 20 9 16 12
10 3 4 5 25 1
22 8 15 2
23
30
18 17 20 21
27
22
31 32
REPLACEMENT PARTS M332 WET SEAL CAST IRON PUMPS
ITEM PART NO DESCRIPTION QTY PRICE
1 13719 O-Ring 1 $2.44
2 15035 Mechanical Seal Assembly 1 $205.40
3 12034 5 ⁄16" - 24 x 3¾" HHCS 4 $7.88
4 12901 5 ⁄16" Flat Washer 8 $0.41
5 12717 O-Ring for Bracket Screw 4 $0.61
6 E13H 11 HP Honda ® Engine 1 $3,425.61
7 12709 O-Ring 4 $0.65
8 13055 Adapter Shaft 1 $101.43
9 19702 Volute 1 $94.00
10 19772 5 Vane Impeller 1 $62.50
11 12705 Check Valve 1 $14.02
12 12774VA Impeller Bolt Gasket 1 $1.29
13 12719A Body O-Ring 1 $12.26
14 12902A Impeller Key 1 $1.43
15 16901 ¼" sq x ¾" Key Stock 1 $2.85
16 13766 3 ⁄ 8" - 24 x 2¼" HFS 1 $3.36
REPLACEMENT PARTS M332 WET SEAL CAST IRON PUMPS
ITEM PART NO DESCRIPTION QTY PRICE
17 18135B Z-Rail 1 $20.22
18 18135A Z-Rail 1 $20.22
19 17029 5 ⁄16" - 18 x 1¾" HHCS 4 $1.09
20 V10118 5 ⁄16" Lock Washer 13 $0.39
21 V10119 5 ⁄16" Hex Nut 4 $0.51
22 CV10175 Gasket 2 $1.20
23 12777 Prime/Drain Plug 2 $2.07
24 UV15163 O-Ring 2 $0.41
25 19703W Rear Bracket 1 $121.00
26 19201W Wet Seal Reservoir 1 $91.00
27 12715A 5 ⁄16" - 24 x 1¾" HHCS 9 $3.41
28 18034 5 ⁄8" -11 Jam Nut 1 $2.92
29 18033 Pump Handle 1 $16.79
30 M19712X Pump Body 1 $192.00
31 13777 ¾" Drain Plug 2 $2.72
32 13778 O-Ring 2 $1.72
7
®
VALVES
LIQUID HANDLING PRODUCTS
C O R P O R A T I O N
CAM LEVER COUPLINGS IBC/TANK ACC. DRY-DISCONNECTS MANIFOLD SYSTEMS ELECTRIC VALVES
Banjo Corporation specializes in injection molding of glass reinforced polypropylene with an excellent reputation for high quality.
Key properties of glass-reinforced polypropylene include being rigid and lightweight, having excellent chemical and corrosion
resistance, stress cracking resistance, low moisture absorption and high impact resistance. Banjo prides itself on innovative
designs, skillful engineering and precise manufacturing.
APPLICATIONS FOR BANJO POLYPROPYLENE LIQUID HANDLING PRODUCTS*:
• Agricultural Fertilizers, Herbicides, Pesticides, Insecticides • Organic & Inorganic Chemicals
• Industrial Chemicals
• Pulp & Paper
• Reverse Osmosis
• Deionized Water
• Inks, Paints, Coatings
• Adhesives, Lubricants, Resins
• Soaps & Detergents
• Alkalis, Acids, Solvents, Corrosives
• Water Treatment, Wastewater
• Textiles
• Plating
• Pharmaceuticals
• Circuit Board Chemistry
• Tank Trucks, Rotomolded Tanks, IBC’s
(Intermediate Bulk Containers)
*All recommendations as to use of parts and materials mentioned in this catalog assume that the buyer will ascertain their
suitability and that all safety and health standards are met.
PRODUCT CHANGES
Banjo Corporation reserves the right to make design changes for the improvement of a product without notice.
TECHNICAL SUPPORT SERVICES
Banjo Corporation has technical service personnel who are always ready to assist you with your questions and concerns about
Banjo Liquid Handling Products and your specific application. We are committed to being your resource for quality products and
efficient technical service.
QUALITY
Banjo Corporation is dedicated to providing quality products and services that satisfy our
customers’ needs. Quality is the responsibility of every employee. Our focus is on continuous
improvement and innovation of quality products. Due to our policy of continuous improvement
all specifications are subject to change without notice.
PIPE FITTINGS
LINE STRAINERS
Let BANJO MAN point you in the right direction with his helpful
tips and guides to our brand new products. Look for BANJO
MAN throughout our catalog to assist you.
PUMPS
®
C O R P O R A T I O N
REFERENCE
A unit of
Catalog No. 52-00 • 2011
8
®
www.banjocorp.com
ORDERING INFORMATION
sales1@banjocorp.com
HOW TO ORDER
Contact your local Banjo Distributor or Banjo Corporation:
BANJO CORPORATION
150 Banjo Drive
Crawfordsville, Indiana 47933 USA
Telephone: (765) 362-7367
Fax: (800) 458-0232 International Fax: (765) 362-0744
E-Mail Technical Questions: sales1@banjocorp.com
E-Mail Orders: orders@banjocorp.com
Website: www.banjocorp.com
Please order in bag/box quantities for quick and easy shipping/
receiving of your order. Use BANJO Part Numbers when ordering.
All items priced each, not per bag or box quantity.
MINIMUM ORDER
Banjo Corporation requires a $50.00 net minimum order, air
shipments excluded. Orders less than $50.00 net will not be
accepted.
CONDITIONS OF SALE–TERMS AND DELIVERY
Terms are 1% 15, net 30 days upon credit approval. Delivery is
F.O.B. Crawfordsville, Indiana unless otherwise specifically
provided in writing. All orders will be shipped freight collect
except orders shipped U.P. S. On U.P. S. shipments the actual
freight charges will be prepaid and added to the invoice.
CLAIMS & RETURNS
All returns must have an accompanying Return Goods
Authorization number (RGA Number) regardless of reason for
return. Please contact Banjo Corporation for an RGA number
prior to returning goods to the above address.
Inspect all shipments for damage upon receipt. If any cartons
are damaged, do not sign for or accept them without driver
making a notation on the freight bill or receipt. After receiving
the shipment, remove the goods and thoroughly inspect
immediately. If any concealed damage is discovered, notify the
delivering carrier at once in writing. Do not move damaged
merchandise until further inspection has been made. Save
carton and packing material for inspection. Do not order carrier
to return merchandise to our factory without contacting Banjo
Corporation.
Claims for shortages or inaccurate filling of orders must be
made within 30 days after receipt of goods. Return shipments
must be prepaid. C.O.D. or “Freight Collect” shipments will not
be accepted. There will be a 30% restocking charge on any items
returned for credit or exchange when the error is not ours. Goods
must be in new and original condition without labels, stickers or
markings, other than Banjo Corporation.
RETURN FOR REPAIR POLICY
1. Items returned for repair will not be accepted without prior
approval and a return authorization number.
2. Defective warranty items will be replaced or repaired at
manufacturer’s option on a no charge basis.
3. The customer will be charged for the appropriate parts
and labor charges for all non-warranty work.
4. The manufacturer will not provide replacement parts at
no charge while repairs are being made.
5. A description of the application (media, temperature,
pressure) and performance of the items must accompany
the return. Please specify type of failure and exact
location of failure.
6. Prior to returning, items must be cleaned and neutralized.
Items which have not been cleaned and neutralized will
not be inspected or repaired.
WARRANTY
Please contact Banjo Corporation for warranty evaluation.
Banjo Corporation is not responsible for product damage resulting
from accident, misuse or abuse, or lack of reasonable
care. Upon confirmation of defects, Banjo Corporation will repair
or replace defective products without charge. No responsibility
is assumed for labor, or any special, incidental or
consequential damages.
We recommend that anyone intending to rely on any
recommendation or to use any parts or material mentioned in
this catalog should satisfy themselves as to such suitability and
that all applicable safety and health standards are met. The
only reliable means for making a final selection is actual field
testing under the conditions of intended use.
UPON RECEIPT OF PUMPS:
1. Inspect pump for damage!
2. If a pum p is damaged, do not sign for or accept damaged
cartons without driver making a notation on freight bill or
receipt.
3. Do not move damaged merchandise any further until
inspection has been made. Save carton and packing
material for inspection.
4. Do not order carrier to return merchandise to our factory
without contacting Banjo Corporation.
BANJO PUMP RETURNS
9. BANjO CORP. is not responsible for pump/engine
damage resulting from accident, misuse or abuse, or lack of
reasonable care.
10. No responsibility is assumed for labor, or any special,
incidental or consequential damages.
11. Engine warranty service and engine parts/accessories
available at authorized Honda and Briggs & Stratton Dealers.
ENGINE WARRANTY
The engines, hydraulic motors, and electric motors are warranted
by the Engine Manufacturer, Not by Banjo Corporation. Please
see engine/motor owners manual. Engine/ motor repair, engine
replacement parts, and engine warranty claims must be handled
through an authorized engine dealer in your locality.
WHEN RETURNING PUMPS:
1. Gasoline Engines must be empty of fuel!
2. Pumps must be cleaned and neutralized.
3. Pack pump in heavy-duty carton with sufficient packing to
protect bottom and all sides.
4. Specify type of failure and exact location of failure.
5. A description of the application (media, temperature, pressure)
and performance of the items must accompany the return.
6. The manufacturer will not provide free replacement parts or
pumps while repairs are being made.
7. The customer will be charged for the appropriate parts and
labor charges for all non-warranty work.
8. Defective pumps will be replaced or repaired at
manufacturer’s option. ®
9